Raymarine Dealer & Installer

Raymarine Electronics Installation Seattle

Axiom chartplotters, Quantum radar, AIS, VHF, autopilots and sonar. Designed as one integrated navigation system, installed and commissioned at your marina across Puget Sound.

Raymarine

Complete Product Line

NMEA 2000

Network Integration

Dockside

Mobile Installation

Puget Sound

Local Service

20+

Years Experience

500+

Vessels Outfitted

5.0

Google Rating

100%

Warranted Work

Customer Reviews

4.4

Google rating

94%

Recommend us on Facebook

Brandon Nixon

Google · 2 years ago

Google review

Shane at Divine replaced the Fusion stereo and speakers on my boat. He did an incredible job guiding me to the right solution and then doing the install. He was mobile so the experience was quite convenient and the workmanship was of the highest quality. In addition, he gave me recommendations to other service providers to do repairs on my boat. My experience was terrific and I highly recommend Shane and Divine.

Pablo Majernik

Google · a year ago

Google review

Shane was great! Very knowledgeable about audio and electronics, great suggestions for products. Best of all, he picked up my boat and returned it the very next day with all new sound system! Really happy with the update so far!

Kevin Godfrey

Google · 2 years ago

Google review

Shane is wonderful to work with. He put a much needed upgraded sound system on my yacht in Lake Union and some other nice gadgets. Beautiful workmanship.

Real reviews from Divine Marine customers · Google · Facebook

Raymarine Electronics We Install

From a single display upgrade to a complete helm refit, every component is selected for your vessel, connected correctly and tested before handover.

Full Axiom and Axiom Pro multifunction display installation. 7″ to 24″. Mounting, wiring, LightHouse cartography setup, and NMEA 2000 integration.

Axiom 7/9/12

Axiom Pro

Axiom XL 24″

Solid state Quantum 2 WiFi radar, Cyclone open array, and Magnum commercial radar. Essential for Puget Sound fog and low visibility navigation.

Quantum 2

Cyclone

Magnum

Class B and Class B+ SOTDMA AIS installation with MMSI programming and chartplotter overlay for collision avoidance on Puget Sound.

Class B AIS

AIS700

MMSI Setup

Fixed mount VHF installation with antenna, DSC setup, MMSI programming, and GPS position integration. Ray53, Ray60, Ray70, and Ray90 series.

Ray53/60/70

DSC & GPS

Hailer

Raymarine EV Series autopilot installation for sailboats and powerboats. Mechanical install, commissioning, and sea trial tuning for tiller, Type 1/2, and hydraulic drives.

EV 100

EV 400

Sea Trial

Through hull, transom mount, and in hull CHIRP sonar, DownVision, and SideVision transducer installation with proper fairing and watertight sealing.

CHIRP

DownVision

SideVision

FLIR M Series and fixed thermal cameras with Axiom chartplotter integration via SeaTalkHS Ethernet. see vessels and hazards in total darkness.

FLIR M Series

CAM200IP

Night Vision

Complete NMEA 2000 backbone design, SeaTalkNG integration, and RayNet Ethernet connections so all instruments share GPS, depth, wind, AIS, and speed data.

NMEA 2000

SeaTalkNG

RayNet

Wind, depth, speed, and heading instrument installation and integration. Essential for sailboat performance and safe navigation on Puget Sound and the Salish Sea.

i70s

Wind Vane

Depth

One Connected Helm

A chartplotter is only as useful as the data reaching it. We plan power, network connections and sensor placement together so navigation, radar and instruments work as a complete system.

Every install is done to ABYC standards with tinned marine cable, correct fusing, strain relief and labeled runs, so the next tech who opens the dash knows exactly what they are looking at.

NMEA 2000 & SeaTalkNG

Correct backbone power, termination and compatible adapters let GPS, heading, depth, wind and AIS data reach the displays that need them. We check existing equipment before specifying the network.

Radar & Sonar Integration

Correct backbone power, termination and compatible adapters let GPS, heading, depth, wind and AIS data reach the displays that need them. We check existing equipment before specifying the network.

Commissioning & Owner Training

Correct backbone power, termination and compatible adapters let GPS, heading, depth, wind and AIS data reach the displays that need them. We check existing equipment before specifying the network.

How We Install Your Raymarine System

A clear plan from the first onboard visit through installation and commissioning.

On Site Consultation

We visit your vessel at your marina anywhere in Seattle. We assess your helm, discuss your needs, and design the right Raymarine system for your boat.

Custom System Design

We spec the right hardware, antenna positions, cable routing, and NMEA 2000 network topology specific to your vessel's layout and use.

Professional Installation

Marine grade wiring, proper waterproofing, clean cable management, and full network commissioning. done right the first time.

Commissioning & Training

We update firmware, configure all settings, and walk you through your complete Raymarine system so you leave fully confident on the water.

Installation At Your Marina

Dockside service and careful system setup for boats throughout greater Seattle and Puget Sound.

Mobile Dockside Service

We come directly to your marina, mooring, or storage facility
On site quotes anywhere in the Seattle area
Work on site at most local Seattle area shipyards
Haul out coordination when the installation requires yard access
Workmanship warranty on all installations

Expert Installation & Setup

NMEA 2000 network design for full system integration
Firmware and chart updates during every service visit
Hands on training on your complete Raymarine system
Sea trial tuning for autopilots and sonar calibration
MMSI registration and DSC configuration for all VHF installs

Raymarine Installation FAQ

Answers to common questions about installation, compatibility and service.

Are you a certified Raymarine dealer in Seattle?

Yes. Divine Marine is a certified Raymarine installer serving Seattle and all of Western Washington. We install the complete Raymarine line including Axiom chartplotters, Quantum radar, EV autopilots, AIS transceivers, and VHF radios.

How long does a Raymarine installation take?

A single chartplotter typically installs in 2 to 4 hours. A full system with chartplotter, radar, AIS, VHF, and autopilot takes 1 to 3 days depending on vessel complexity. We give realistic timelines during your consultation.

Will Raymarine work with my existing Garmin or Simrad electronics?

Yes. Raymarine uses NMEA 2000. a universal marine standard compatible with Garmin, Simrad, Furuno, and most other brands. We design integration schemes so your Raymarine display shows data from your existing instruments.

Do you install Raymarine on sailboats?

Absolutely. We install Raymarine on all vessel types. monohull and catamaran sailboats, powerboats, sportfishers, trawlers, and large yachts, with sailboat specific consideration for wind instruments, autopilots, and mast top antenna placement.

Do you service Kirkland, Bellevue & Eastside Seattle?

Yes. Our mobile service covers all of greater Seattle including Kirkland, Bellevue, Redmond, Bothell, Edmonds, and all Lake Washington marinas. We also serve Tacoma, Everett, Gig Harbor, and Bremerton.

What is NMEA 2000 and why does it matter?

NMEA 2000 is the digital network standard that allows all your marine electronics. GPS, depth, speed, wind, AIS. to share data across every display simultaneously. A properly designed NMEA 2000 backbone is essential for any multi instrument Raymarine system.

Service Areas — Pacific Northwest

Mobile service across all of Western Washington. We service boats at marinas, moorages & dry storage throughout the region.

Seattle, WA

Kirkland

Bellevue

Redmond

Bothell

Edmonds

Everett

Tacoma

Gig Harbor

Bremerton

Anacortes

Port Townsend

Lake Washington

Lake Union

Puget Sound

San Juan Islands

Complete Your Marine Electronics Refit

Explore navigation, connectivity and marine power services.