On Site Estimates · Mobile Service
- Home
- Boat & Yacht Detailing
- Teak Cleaning & Restoration
Teak Restoration Seattle
Teak Cleaning & Restoration Seattle & Puget Sound
Weathered gray teak decks, trim and furniture cleaned, brightened and sealed back to their natural golden beauty.
Two Part
Clean & Brighten
Sealed
Or Oiled
Gentle
Fiber Safe Methods
Mobile
At Your Slip
Years Experience
Vessels Outfitted
Google Rating
Warranted Work
Customer Reviews
Google rating
Recommend us on Facebook
B
Brandon Nixon
Google · 2 years ago
Google review
Shane at Divine replaced the Fusion stereo and speakers on my boat. He did an incredible job guiding me to the right solution and then doing the install. He was mobile so the experience was quite convenient and the workmanship was of the highest quality. In addition, he gave me recommendations to other service providers to do repairs on my boat. My experience was terrific and I highly recommend Shane and Divine.
P
Pablo Majernik
Google · a year ago
Google review
Shane was great! Very knowledgeable about audio and electronics, great suggestions for products. Best of all, he picked up my boat and returned it the very next day with all new sound system! Really happy with the update so far!
K
Kevin Godfrey
Google · 2 years ago
Google review
Shane is wonderful to work with. He put a much needed upgraded sound system on my yacht in Lake Union and some other nice gadgets. Beautiful workmanship.
Teak Restoration Seattle
Gray, Mildewed Teak Can Come Back To Gold
Teak’s natural oils deplete under sun, rain and salt, leaving that silvery gray patina every PNW boat owner knows. In our damp climate, mildew and mold move in on top of it. Left long enough, the grain raises, the surface gets rough and the wood starts to degrade in earnest.
Restoration done right is gentle. We use marine grade two part cleaners and brighteners that lift dirt, mildew and old sealers without tearing up the wood fibers, the mistake that pressure washers and harsh scrubbing make. Where the surface needs it, light sanding evens things out before brightening brings back the warm golden color under the gray.
The finish choice matters and we help you make it honestly: teak oil for the classic look with more frequent upkeep, or a quality sealer for longer protection with less maintenance. Either way, well kept brightwork is one of the highest value details on any boat, for both looks and resale.
Capabilities
What We Do
Thermal, low light and engine room cameras, installed and networked as one system.
Teak Deck Cleaning
Full decks cleaned across the grain with fiber safe marine cleaners, never pressure washed.
Brightening
Two part brighteners neutralize discoloration and restore the golden hue under gray patina.
Light Sanding
Careful sanding where needed to remove raised grain and leave a smooth, even surface.
Sealing & Oiling
Quality teak sealers or oils applied based on your look preference and maintenance plans.
Trim & Furniture
Cap rails, toe rails, steps, tables and cockpit furniture restored alongside the decks.
Mildew & Mold Treatment
PNW specific mildew and mold removed and the wood treated to slow its return.
How It Goes
The Process
Four steps from the first look at your boat to a night test on the water.
Assess
We evaluate the wood's condition and decide between cleaning, brightening or light sanding.
Protect
Surrounding gelcoat, hardware and canvas masked before any cleaner touches the deck.
Clean
Marine grade teak cleaner lifts dirt, mildew and old finishes without damaging fibers.
Sand
Light sanding where needed to smooth raised grain and even the surface.
Brighten
Brightener restores the warm golden color and neutralizes the cleaner.
Seal Or Oil
Your chosen finish applied to protect against UV, moisture and weathering.
Every Teak Job Includes
- Fiber safe cleaning, never pressure washing
- Surrounding gelcoat, canvas and hardware protected
- Mildew and mold fully treated
- Finish choice matched to your maintenance plans
- Even, consistent color across all brightwork
Questions
Frequently Asked Questions
Oil or sealer, which should I choose?
Oil gives the classic rich look but needs reapplication every few months in our climate. Sealer lasts longer, often a full season, with a slightly more matte look. If you want low maintenance, seal. If you love the oiled look and do not mind the upkeep, oil.
Will cleaning damage the caulk seams?
Not the way we do it. Harsh pressure washing and aggressive scrubbing damage seams and fibers. Our process is built around being gentle on both.
How often does teak need this?
In the Pacific Northwest, a full clean and brighten once a year keeps teak in good shape, with the finish refreshed as needed. Neglected teak needs more sanding, which removes wood, so regular care genuinely extends its life.
Can you restore teak that has been gray for years?
Almost always, yes. Even long neglected teak usually comes back with cleaning, light sanding and brightening. Severely weathered wood takes more work but the transformation is dramatic.
More Marine Electronics Services
Heavy Oxidation Removal
Restore your boat’s original shine and protect the gelcoat from further breakdown.
Compounding & Polishing
Eliminate scratches, swirl marks and years of dock rash from the finish.
Boat Waxing & Sealing
Long lasting protection against Pacific Northwest sun, rain and salt.
Exterior Boat Washes
Gentle but effective cleaning that lifts dirt, grime and salt residue.
Stainless Steel Polishing
Bring back the brilliance of railings, cleats, rub rails and hardware.
Boat Name & Graphics Removal
Clean, safe removal of old names, registration numbers and graphics.
Bilge & Engine Room Detail
Degreased, cleaned and inspected so leaks show up before they become failures.