Edmonds, Snohomish County

Fiberglass & Gelcoat Repair in Edmonds

From gelcoat chip touch ups to structural hull repair, we restore fiberglass back to factory finish. Color matched gelcoat, proper layup, and mobile service so your boat never leaves the water unless it has to.

Mobile

We Come To Your Slip

20+ Yrs

Marine Experience

ABYC

Standards Followed

Fast

Written Estimates

20+

Years Experience

500+

Vessels Outfitted

5.0

Google Rating

100%

Warranted Work

Edmonds Mobile Service

What Fiberglass & Gelcoat in Edmonds Includes

Structural and cosmetic fiberglass work at your slip. Every job in Edmonds is mobile dockside service. We come to your marina, slip, dry storage, or driveway with a fully equipped truck.

We repair fiberglass and gelcoat for Edmonds boaters without the usual haul out and yard wait. Color matched gelcoat, proper layup and careful fairing mean the repair disappears, whether the boat is on Puget Sound or parked in Downtown Edmonds.

Edmonds Local Coverage: Edmonds Marina and Puget Sound waterfront.

Gelcoat color matching and spot repair
Hull, deck, and transom structural repair
Stress crack and spider crack restoration
Blister repair and barrier coat application
Non skid restoration and reapplication
Mobile dockside service at your marina

Why Edmonds Boaters Choose Divine Marine

Salt spray at Port of Edmonds drives blister and barrier coat work. We perform slip side gelcoat and structural repairs without hauling out.

Edmonds is a full saltwater harbor facing open Puget Sound. Wind waves from the north, ferry wake from the Edmonds to Kingston run and steady salt spray mean corrosion and gelcoat wear show up faster here than on the lakes.

Common Edmonds repairs include gelcoat chips and gouges, cracked swim platforms, transom and stringer work, non skid restoration and blister repair. Boats that see salt water like saltwater sport fishers, crabbing skiffs, cruisers and sailboats moored at the Port of Edmonds each wear in different ways, and we plan the layup and gelcoat to match.

We run up I-405 and SR 104 or down from I-5 and are at the Port of Edmonds docks in well under an hour from Kirkland.

Edmonds Marinas & Launches

Areas We Serve In Edmonds

Photo Gallery

Fiberglass & Gelcoat Projects From Our Shop And The Docks

A sample of recent work. See more in the marine electronics & audio photo gallery.

Malibu Gelcoat Repair

Malibu boats

Supra GelCoat Respray

Supra gelcoat repair

Before: torn gunwale seen from inside the cockpit

Fiberglass and gelcoat repair, Edmonds area

Kenworth Fiberglass Hood

Kenworth fiberglass hood repair

Bayliner Transom Door

Bayliner finished door

WaveRunner Repair

Jet ski hull fiberglass damage

How It Works

How Edmonds Jobs Run

Same process on every boat, whether it is a saltwater sport fishers or a boat in a covered slip. Salmon openers and crab season bring a spring and summer rush at the Port of Edmonds, so electronics checks and hull work are best scheduled in late winter.

Send Photos Of The Damage

Photos of the chip, crack or impact area plus the boat location in Edmonds let us plan materials and gelcoat color before arriving.

Written Repair Estimate

We quote the repair in writing, including whether it can be done in the water, on the trailer or needs a short haul out.

Repair, Fair & Color Match

Damaged laminate is ground out, rebuilt with proper layup, faired and finished with tinted gelcoat matched to the hull.

Final Buff & Inspection

The repair is wet sanded and buffed, then inspected with you so it blends with the rest of the boat.

Fast Facts For Edmonds

County: Snohomish County, WA
Waterways: Puget Sound, Edmonds waterfront and Possession Sound approaches
Launches & marinas: Port of Edmonds marina, Port of Edmonds sling launch and Edmonds fishing pier
Neighborhoods: Downtown Edmonds, Perrinville, Meadowdale, Five Corners and Westgate
Water type: Salt water
Base: 611 4th Ave Ste 201, Kirkland

Customer Reviews

4.4

Google rating

94%

Recommend us on Facebook

Brandon Nixon

Google · 2 years ago

Google review

Shane at Divine replaced the Fusion stereo and speakers on my boat. He did an incredible job guiding me to the right solution and then doing the install. He was mobile so the experience was quite convenient and the workmanship was of the highest quality. In addition, he gave me recommendations to other service providers to do repairs on my boat. My experience was terrific and I highly recommend Shane and Divine.

Pablo Majernik

Google · a year ago

Google review

Shane was great! Very knowledgeable about audio and electronics, great suggestions for products. Best of all, he picked up my boat and returned it the very next day with all new sound system! Really happy with the update so far!

Kevin Godfrey

Google · 2 years ago

Google review

Shane is wonderful to work with. He put a much needed upgraded sound system on my yacht in Lake Union and some other nice gadgets. Beautiful workmanship.

Real reviews from Divine Marine customers · Google · Facebook

Fiberglass & Gelcoat FAQ: Edmonds

Common questions from Edmonds boat owners about fiberglass & gelcoat.

Can you color match gelcoat on my Edmonds boat?

Yes. We tint gelcoat on site to match the existing finish, including faded and oxidized colors common on boats used on Puget Sound. Small chips blend in after sanding and buffing, and larger repairs are faired before the final gelcoat.

Does my boat need to be hauled out for fiberglass repair in Edmonds?

Usually not. Most gelcoat, swim step and topside repairs are done at the slip, dock or on the trailer in Edmonds. Below waterline structural work or blister jobs may need the boat out of the water, and we coordinate that for you.

How long does a fiberglass repair take?

Cosmetic gelcoat repairs in Edmonds usually take one or two visits. Structural work on transoms, stringers or hulls can take several days because each layer needs to cure properly, especially in the cool, damp weather around Puget Sound.

Do you work at the Port of Edmonds marina?

Yes. Most of our Edmonds jobs are done right at the slip in the Port of Edmonds marina. We follow the port’s contractor rules, keep runoff out of the water and coordinate with the sling launch crew when a boat needs to come out.

Fiberglass & Gelcoat In Nearby Cities

Mobile fiberglass & gelcoat across Snohomish County and the rest of Western Washington. View all service areas.

Lynnwood

Shoreline

Bothell

Woodinville

Kirkland

Seattle

Everett

Redmond

Mercer Island

Marysville

Monroe

Sammamish

All Divine Marine Services

Mobile marine service from one shop in Kirkland. Pick a service for full details, pricing and photos.

Marine Electronics

Chartplotters, radar, AIS, autopilots, and NMEA 2000 networks.

Marine Audio

Fusion, JL Audio, Wet Sounds, and Rockford Fosgate builds.

Starlink Marine

High speed internet at the dock and offshore.

Victron Power Systems

Lithium banks, inverters, chargers, and monitoring.

Fiberglass & Gelcoat Repair

Structural repair, color matched gelcoat, and non skid.

Boat & Yacht Detailing

Wash, compound, polish, ceramic coating, and teak care.

Indoor Boat Storage

Heated indoor storage, winterization, and concierge pickup.

GatorStep Decking

Custom foam decking cut to your boat pattern.

Boat Recycling & Disposal

Fair cost scrapping and recycling for retired boats.

Fiberglass & Gelcoat Repair in Edmonds

What Fiberglass & Gelcoat in Edmonds Includes