Skip to main content

Divine Marine

Divine Marine logo
Inquiry
Menu

Everett, Snohomish County

Fiberglass & Gelcoat Repair in Everett

From gelcoat chip touch ups to structural hull repair, we restore fiberglass back to factory finish. Color matched gelcoat, proper layup, and mobile service so your boat never leaves the water unless it has to.

Get A Repair Quote
Call 206 930 7743

Mobile

We Come To Your Slip

20+ Yrs

Marine Experience

ABYC

Standards Followed

Fast

Written Estimates

20+

Years Experience

500+

Vessels Outfitted

5.0

Google Rating

100%

Warranted Work

Everett Mobile Service

What Fiberglass & Gelcoat in Everett Includes

Structural and cosmetic fiberglass work at your slip. Every job in Everett is mobile dockside service. We come to your marina, slip, dry storage, or driveway with a fully equipped truck.

Fiberglass and gelcoat repair in Everett is mostly about the damage local boats actually see: dock rash and hull strikes around Port of Everett Marina, cracked swim steps and stress cracks around hardware. We fix it at your slip, dock or driveway whenever the repair allows.

Everett Local Coverage: Everett Marina and the Snohomish River delta.

  • Gelcoat color matching and spot repair
  • Hull, deck, and transom structural repair
  • Stress crack and spider crack restoration
  • Blister repair and barrier coat application
  • Non skid restoration and reapplication
  • Mobile dockside service at your marina
See The Full Fiberglass & Gelcoat Repair Page
Supra GelCoat Respray, Supra gelcoat repair by Divine Marine

Why Everett Boaters Choose Divine Marine

Port of Everett slips see river debris and dock rash. We repair hull strikes, swim step damage, and gelcoat chips at the dock.

The Port of Everett sits where the Snohomish River meets Port Gardner Bay, so boats see brackish water, floating river debris after storms and silt that settles on decks and waterlines. Out in Possession Sound it is full saltwater with commercial traffic.

Common Everett repairs include gelcoat chips and gouges, cracked swim platforms, transom and stringer work, non skid restoration and blister repair. Boats that see both fresh and salt water like salmon and crab boats, river runners, cruisers and sailboats in the Port of Everett Marina each wear in different ways, and we plan the layup and gelcoat to match.

Everett is a straight run north on I-405 and I-5 from Kirkland, and we regularly stack several Port of Everett appointments into one trip.

Everett Marinas & Launches

  • Port of Everett
  • Port of Everett Marina
  • 10th Street Boat Launch
  • Jetty Island

Areas We Serve In Everett

  • Snohomish River delta
  • Possession Sound
  • Jetty Island
  • Port Gardner
  • Northwest Everett
  • Lowell

Photo Gallery

Fiberglass & Gelcoat Projects From Our Shop And The Docks

A sample of recent work. See more in the marine electronics & audio photo gallery.

Stingray Boat, Stingray boat hull damage by Divine Marine

Stingray Boat

Stingray boat hull damage

Before: impact damage on the stern corner of a Malibu VLX

Before: impact damage on the stern corner of a Malibu VLX

Fiberglass and gelcoat repair, Everett area

After: stern corner rebuilt with gelcoat and trim restored

After: stern corner rebuilt with gelcoat and trim restored

Fiberglass and gelcoat repair, Everett area

Motorhome Rv Repair, Fiberglass Repair project by Divine Marine

Motorhome Rv Repair

Fiberglass Repair project

Bass Boat Floor Repair, Fiberglass Repair project by Divine Marine

Bass Boat Floor Repair

Fiberglass Repair project

Malibu Gelcoat Repair, Malibu boats by Divine Marine

Malibu Gelcoat Repair

Malibu boats

How It Works

How Everett Jobs Run

Same process on every boat, whether it is a salmon and crab boats or a boat in a covered slip. Crab season and the summer salmon fishery around Possession Sound fill the 10th Street launch, so Everett owners get the most from pre season service in March and April.

01

Send Photos Of The Damage

Photos of the chip, crack or impact area plus the boat location in Everett let us plan materials and gelcoat color before arriving.

02

Written Repair Estimate

We quote the repair in writing, including whether it can be done in the water, on the trailer or needs a short haul out.

03

Repair, Fair & Color Match

Damaged laminate is ground out, rebuilt with proper layup, faired and finished with tinted gelcoat matched to the hull.

04

Final Buff & Inspection

The repair is wet sanded and buffed, then inspected with you so it blends with the rest of the boat.

Before: torn gunwale seen from inside the cockpit

Fast Facts For Everett

  • County: Snohomish County, WA
  • Waterways: Port Gardner Bay, Possession Sound, Snohomish River delta and Jetty Island channel
  • Launches & marinas: Port of Everett Marina, 10th Street Boat Launch and Jetty Island
  • Neighborhoods: Port Gardner, Northwest Everett, Lowell, Silver Lake and Mukilteo border
  • Water type: Both fresh and salt water
  • Base: 611 4th Ave Ste 201, Kirkland

Customer Reviews

4.4

Google rating

94%

Recommend us on Facebook

Write a Review
See All Reviews

B

Brandon Nixon

Google · 2 years ago

Google review

Shane at Divine replaced the Fusion stereo and speakers on my boat. He did an incredible job guiding me to the right solution and then doing the install. He was mobile so the experience was quite convenient and the workmanship was of the highest quality. In addition, he gave me recommendations to other service providers to do repairs on my boat. My experience was terrific and I highly recommend Shane and Divine.

P

Pablo Majernik

Google · a year ago

Google review

Shane was great! Very knowledgeable about audio and electronics, great suggestions for products. Best of all, he picked up my boat and returned it the very next day with all new sound system! Really happy with the update so far!

K

Kevin Godfrey

Google · 2 years ago

Google review

Shane is wonderful to work with. He put a much needed upgraded sound system on my yacht in Lake Union and some other nice gadgets. Beautiful workmanship.

Real reviews from Divine Marine customers · Google · Facebook

Fiberglass & Gelcoat FAQ: Everett

Common questions from Everett boat owners about fiberglass & gelcoat.

Can you color match gelcoat on my Everett boat?

Yes. We tint gelcoat on site to match the existing finish, including faded and oxidized colors common on boats used on Port Gardner Bay. Small chips blend in after sanding and buffing, and larger repairs are faired before the final gelcoat.

Does my boat need to be hauled out for fiberglass repair in Everett?

Usually not. Most gelcoat, swim step and topside repairs are done at the slip, dock or on the trailer in Everett. Below waterline structural work or blister jobs may need the boat out of the water, and we coordinate that for you.

How long does a fiberglass repair take?

Cosmetic gelcoat repairs in Everett usually take one or two visits. Structural work on transoms, stringers or hulls can take several days because each layer needs to cure properly, especially in the cool, damp weather around Port Gardner Bay.

Do you work at the Port of Everett Marina and the 10th Street launch?

Yes. We work at slips throughout the Port of Everett Marina and can meet trailered boats near the 10th Street Boat Launch. For river and delta boats we also come to your home in Everett or nearby.

Fiberglass & Gelcoat In Nearby Cities

Mobile fiberglass & gelcoat across Snohomish County and the rest of Western Washington. View all service areas.

Marysville
Lake Stevens
Lynnwood
Monroe
Edmonds
Bothell
Woodinville
Shoreline
Kirkland
Redmond
Sammamish
Seattle

Other Services We Offer In Everett

Marine Electronics Installation & Repair

View the Everett page for marine electronics installation & repair.

Boat Detailing

View the Everett page for boat detailing.

Indoor Boat Storage

View the Everett page for indoor boat storage.