Skip to main content

Divine Marine

Divine Marine logo
Inquiry
Menu

Marysville, Snohomish County

Fiberglass & Gelcoat Repair in Marysville

From gelcoat chip touch ups to structural hull repair, we restore fiberglass back to factory finish. Color matched gelcoat, proper layup, and mobile service so your boat never leaves the water unless it has to.

Get A Repair Quote
Call 206 930 7743

Mobile

We Come To Your Slip

20+ Yrs

Marine Experience

ABYC

Standards Followed

Fast

Written Estimates

20+

Years Experience

500+

Vessels Outfitted

5.0

Google Rating

100%

Warranted Work

Marysville Mobile Service

What Fiberglass & Gelcoat in Marysville Includes

Structural and cosmetic fiberglass work at your slip. Every job in Marysville is mobile dockside service. We come to your marina, slip, dry storage, or driveway with a fully equipped truck.

We repair fiberglass and gelcoat for Marysville boaters without the usual haul out and yard wait. Color matched gelcoat, proper layup and careful fairing mean the repair disappears, whether the boat is on Ebey Slough or parked in Downtown Marysville.

Marysville Local Coverage: North Sound coverage and trailer boat service.

  • Gelcoat color matching and spot repair
  • Hull, deck, and transom structural repair
  • Stress crack and spider crack restoration
  • Blister repair and barrier coat application
  • Non skid restoration and reapplication
  • Mobile dockside service at your marina
See The Full Fiberglass & Gelcoat Repair Page
Bass Boat Floor Repair, Fiberglass Repair project by Divine Marine

Why Marysville Boaters Choose Divine Marine

North Sound boats in Marysville see salt spray and crabbing wear. We repair gelcoat, transom, and swim step damage on site.

Marysville boaters run north Puget Sound water around Tulalip Bay and Port Susan as often as they run the lakes. Saltwater crabbing gear, bait and fish blood are hard on decks, and the slough and river mouths leave silt along the waterline.

Common Marysville repairs include gelcoat chips and gouges, cracked swim platforms, transom and stringer work, non skid restoration and blister repair. Boats that see both fresh and salt water like crabbing and salmon boats that run to Tulalip Bay and Port Susan, plus ski boats on Lake Goodwin and Lake Ki each wear in different ways, and we plan the layup and gelcoat to match.

We head north on I-5 past Everett and are working in Marysville, Smokey Point or near Lake Goodwin by mid morning.

Marysville Marinas & Launches

  • Port of Everett launch
  • Kayak Point
  • Lake Goodwin access
  • Lake Ki access

Areas We Serve In Marysville

  • Ebey Slough
  • Tulalip Bay
  • Kayak Point
  • Downtown Marysville
  • Lakewood
  • Sunnyside

Photo Gallery

Fiberglass & Gelcoat Projects From Our Shop And The Docks

A sample of recent work. See more in the marine electronics & audio photo gallery.

Bayliner Restoration, Rotten transom by Divine Marine

Bayliner Restoration

Rotten transom

Cadillac Fiberglass Roof, Fiberglass Repair project by Divine Marine

Cadillac Fiberglass Roof

Fiberglass Repair project

Stingray Boat, Stingray boat hull damage by Divine Marine

Stingray Boat

Stingray boat hull damage

Before: impact damage on the stern corner of a Malibu VLX

Before: impact damage on the stern corner of a Malibu VLX

Fiberglass and gelcoat repair, Marysville area

After: stern corner rebuilt with gelcoat and trim restored

After: stern corner rebuilt with gelcoat and trim restored

Fiberglass and gelcoat repair, Marysville area

Motorhome Rv Repair, Fiberglass Repair project by Divine Marine

Motorhome Rv Repair

Fiberglass Repair project

How It Works

How Marysville Jobs Run

Same process on every boat, whether it is a crabbing and salmon boats that run to Tulalip Bay and Port Susan or a boat in a covered slip. Crab season drives a summer rush in Marysville, so owners book electronics and hull work in spring and full cleanups once the pots come out of the water.

01

Send Photos Of The Damage

Photos of the chip, crack or impact area plus the boat location in Marysville let us plan materials and gelcoat color before arriving.

02

Written Repair Estimate

We quote the repair in writing, including whether it can be done in the water, on the trailer or needs a short haul out.

03

Repair, Fair & Color Match

Damaged laminate is ground out, rebuilt with proper layup, faired and finished with tinted gelcoat matched to the hull.

04

Final Buff & Inspection

The repair is wet sanded and buffed, then inspected with you so it blends with the rest of the boat.

Malibu Gelcoat Repair, Malibu boats by Divine Marine

Fast Facts For Marysville

  • County: Snohomish County, WA
  • Waterways: Ebey Slough, Tulalip Bay, Port Susan, Lake Goodwin and Lake Ki
  • Launches & marinas: Port of Everett launch, Kayak Point, Lake Goodwin access and Lake Ki access
  • Neighborhoods: Downtown Marysville, Lakewood, Sunnyside, Getchell and Smokey Point
  • Water type: Both fresh and salt water
  • Base: 611 4th Ave Ste 201, Kirkland

Customer Reviews

4.4

Google rating

94%

Recommend us on Facebook

Write a Review
See All Reviews

B

Brandon Nixon

Google · 2 years ago

Google review

Shane at Divine replaced the Fusion stereo and speakers on my boat. He did an incredible job guiding me to the right solution and then doing the install. He was mobile so the experience was quite convenient and the workmanship was of the highest quality. In addition, he gave me recommendations to other service providers to do repairs on my boat. My experience was terrific and I highly recommend Shane and Divine.

P

Pablo Majernik

Google · a year ago

Google review

Shane was great! Very knowledgeable about audio and electronics, great suggestions for products. Best of all, he picked up my boat and returned it the very next day with all new sound system! Really happy with the update so far!

K

Kevin Godfrey

Google · 2 years ago

Google review

Shane is wonderful to work with. He put a much needed upgraded sound system on my yacht in Lake Union and some other nice gadgets. Beautiful workmanship.

Real reviews from Divine Marine customers · Google · Facebook

Fiberglass & Gelcoat FAQ: Marysville

Common questions from Marysville boat owners about fiberglass & gelcoat.

Can you color match gelcoat on my Marysville boat?

Yes. We tint gelcoat on site to match the existing finish, including faded and oxidized colors common on boats used on Ebey Slough. Small chips blend in after sanding and buffing, and larger repairs are faired before the final gelcoat.

Does my boat need to be hauled out for fiberglass repair in Marysville?

Usually not. Most gelcoat, swim step and topside repairs are done at the slip, dock or on the trailer in Marysville. Below waterline structural work or blister jobs may need the boat out of the water, and we coordinate that for you.

How long does a fiberglass repair take?

Cosmetic gelcoat repairs in Marysville usually take one or two visits. Structural work on transoms, stringers or hulls can take several days because each layer needs to cure properly, especially in the cool, damp weather around Ebey Slough.

Do you cover Lake Goodwin, Lake Ki and Smokey Point?

Yes. Our Marysville coverage includes Smokey Point, Lake Goodwin, Lake Ki and the Tulalip Bay area. Most work is done at your driveway or dock.

Fiberglass & Gelcoat In Nearby Cities

Mobile fiberglass & gelcoat across Snohomish County and the rest of Western Washington. View all service areas.

Everett
Lake Stevens
Monroe
Lynnwood
Edmonds
Bothell
Woodinville
Shoreline
Kirkland
Redmond
Sammamish
Seattle

Other Services We Offer In Marysville

Marine Electronics Installation & Repair

View the Marysville page for marine electronics installation & repair.

Boat Detailing

View the Marysville page for boat detailing.

Indoor Boat Storage

View the Marysville page for indoor boat storage.