Skip to main content

Divine Marine

Divine Marine logo
Inquiry
Menu

Lake Stevens, Snohomish County

Fiberglass & Gelcoat Repair in Lake Stevens

From gelcoat chip touch ups to structural hull repair, we restore fiberglass back to factory finish. Color matched gelcoat, proper layup, and mobile service so your boat never leaves the water unless it has to.

Get A Repair Quote
Call 206 930 7743

Mobile

We Come To Your Slip

20+ Yrs

Marine Experience

ABYC

Standards Followed

Fast

Written Estimates

20+

Years Experience

500+

Vessels Outfitted

5.0

Google Rating

100%

Warranted Work

Lake Stevens Mobile Service

What Fiberglass & Gelcoat in Lake Stevens Includes

Structural and cosmetic fiberglass work at your slip. Every job in Lake Stevens is mobile dockside service. We come to your marina, slip, dry storage, or driveway with a fully equipped truck.

Fiberglass and gelcoat repair in Lake Stevens is mostly about the damage local boats actually see: trailer scrapes, launch ramp dings and dock rash at Wyatt Park boat launch, cracked swim steps and stress cracks around hardware. We fix it at your slip, dock or driveway whenever the repair allows.

Lake Stevens Local Coverage: Lake Stevens freshwater and wake boat country.

  • Gelcoat color matching and spot repair
  • Hull, deck, and transom structural repair
  • Stress crack and spider crack restoration
  • Blister repair and barrier coat application
  • Non skid restoration and reapplication
  • Mobile dockside service at your marina
See The Full Fiberglass & Gelcoat Repair Page
Bayliner Restoration, Rotten transom by Divine Marine

Why Lake Stevens Boaters Choose Divine Marine

Wake boats on Lake Stevens stress swim platforms and transoms. We rebuild structural fiberglass and color match gelcoat on site.

Lake Stevens is the biggest lake in Snohomish County and a true wake boat lake. Boats live on lifts and private docks around the shoreline, so constant surf sessions, full ballast and summer sun are the main sources of wear.

Common Lake Stevens repairs include gelcoat chips and gouges, cracked swim platforms, transom and stringer work, non skid restoration and blister repair. Boats that see fresh water like wake surf boats, ski boats and pontoons on the largest lake in Snohomish County each wear in different ways, and we plan the layup and gelcoat to match.

We head up I-405 and SR 9 or cut across US 2, and set up at lakefront homes, Wyatt Park or Lundeen Park.

Lake Stevens Marinas & Launches

  • Wyatt Park boat launch
  • Lundeen Park
  • North Cove Park

Areas We Serve In Lake Stevens

  • North Cove Park
  • Lundeen Park launch
  • Catherine Creek
  • Frontier Village
  • Cavalero
  • Machias

Photo Gallery

Fiberglass & Gelcoat Projects From Our Shop And The Docks

A sample of recent work. See more in the marine electronics & audio photo gallery.

Kenworth Fiberglass Hood, Kenworth fiberglass hood repair by Divine Marine

Kenworth Fiberglass Hood

Kenworth fiberglass hood repair

Bayliner Transom Door, Bayliner finished door by Divine Marine

Bayliner Transom Door

Bayliner finished door

WaveRunner Repair, Jet ski hull fiberglass damage by Divine Marine

WaveRunner Repair

Jet ski hull fiberglass damage

Hot Rod Repair, Hot rod fiberglass by Divine Marine

Hot Rod Repair

Hot rod fiberglass

Before: close view of shattered fiberglass and exposed wiring

Before: close view of shattered fiberglass and exposed wiring

Fiberglass and gelcoat repair, Lake Stevens area

Cobalt fiberglass gelcoat repair, Fiberglass Repair project by Divine Marine

Cobalt fiberglass gelcoat repair

Fiberglass Repair project

How It Works

How Lake Stevens Jobs Run

Same process on every boat, whether it is a wake surf boats or a boat in a covered slip. The surf crowd is out from Memorial Day well into September, so Lake Stevens owners usually book upgrades in spring and repairs once the boats come off the lifts in fall.

01

Send Photos Of The Damage

Photos of the chip, crack or impact area plus the boat location in Lake Stevens let us plan materials and gelcoat color before arriving.

02

Written Repair Estimate

We quote the repair in writing, including whether it can be done in the water, on the trailer or needs a short haul out.

03

Repair, Fair & Color Match

Damaged laminate is ground out, rebuilt with proper layup, faired and finished with tinted gelcoat matched to the hull.

04

Final Buff & Inspection

The repair is wet sanded and buffed, then inspected with you so it blends with the rest of the boat.

Cadillac Fiberglass Roof, Fiberglass Repair project by Divine Marine

Fast Facts For Lake Stevens

  • County: Snohomish County, WA
  • Waterways: Lake Stevens, Catherine Creek inlet and North Cove
  • Launches & marinas: Wyatt Park boat launch, Lundeen Park and North Cove Park
  • Neighborhoods: Frontier Village, Cavalero, Machias, Sunnyside and Lake Stevens waterfront
  • Water type: Fresh water
  • Base: 611 4th Ave Ste 201, Kirkland

Customer Reviews

4.4

Google rating

94%

Recommend us on Facebook

Write a Review
See All Reviews

B

Brandon Nixon

Google · 2 years ago

Google review

Shane at Divine replaced the Fusion stereo and speakers on my boat. He did an incredible job guiding me to the right solution and then doing the install. He was mobile so the experience was quite convenient and the workmanship was of the highest quality. In addition, he gave me recommendations to other service providers to do repairs on my boat. My experience was terrific and I highly recommend Shane and Divine.

P

Pablo Majernik

Google · a year ago

Google review

Shane was great! Very knowledgeable about audio and electronics, great suggestions for products. Best of all, he picked up my boat and returned it the very next day with all new sound system! Really happy with the update so far!

K

Kevin Godfrey

Google · 2 years ago

Google review

Shane is wonderful to work with. He put a much needed upgraded sound system on my yacht in Lake Union and some other nice gadgets. Beautiful workmanship.

Real reviews from Divine Marine customers · Google · Facebook

Fiberglass & Gelcoat FAQ: Lake Stevens

Common questions from Lake Stevens boat owners about fiberglass & gelcoat.

Can you color match gelcoat on my Lake Stevens boat?

Yes. We tint gelcoat on site to match the existing finish, including faded and oxidized colors common on boats used on Lake Stevens. Small chips blend in after sanding and buffing, and larger repairs are faired before the final gelcoat.

Does my boat need to be hauled out for fiberglass repair in Lake Stevens?

Usually not. Most gelcoat, swim step and topside repairs are done at the slip, dock or on the trailer in Lake Stevens. Below waterline structural work or blister jobs may need the boat out of the water, and we coordinate that for you.

How long does a fiberglass repair take?

Cosmetic gelcoat repairs in Lake Stevens usually take one or two visits. Structural work on transoms, stringers or hulls can take several days because each layer needs to cure properly, especially in the cool, damp weather around Lake Stevens.

Can you work on my boat while it is on a lift at Lake Stevens?

Often, yes. Many Lake Stevens jobs are done on the boat lift or at a private dock. If the repair needs the boat level and dry, we work on the trailer in your driveway or near Wyatt Park instead.

Fiberglass & Gelcoat In Nearby Cities

Mobile fiberglass & gelcoat across Snohomish County and the rest of Western Washington. View all service areas.

Marysville
Everett
Monroe
Lynnwood
Woodinville
Bothell
Edmonds
Shoreline
Redmond
Kirkland
Sammamish
Seattle

Other Services We Offer In Lake Stevens

Marine Electronics Installation & Repair

View the Lake Stevens page for marine electronics installation & repair.

Boat Detailing

View the Lake Stevens page for boat detailing.

Indoor Boat Storage

View the Lake Stevens page for indoor boat storage.